MEGATRON MT 5100 S2 – Driving Unit

DESCRIPTION

– When testing and optimizing formulas, high process safety is paramount.

– This system enables processing of complex material systems with absolutely minimal loss of mass and minimal energy.

– This pilot plant format production system delivers efficent, replicable results like those of our Inline machines used in large volume production.

Benefits

Your pilot plant expert

– This system was developed to help you realize your ideas under as realistic conditions as possible in small economic quantities.

– During subsequent scale-up, the results can be replicated with our large machines.

– Applications are mainly in recirculation mode.

– Depending on the material’s system, the components bind into the finest emulsions or suspensions with droplet or particle sizes down to a few microns.

– These results are achieved by the machines high speed and the resulting peripheral tip speeds as well as precise rotor / stator geometry.

– Depending on the material’s system being process, the desired fineness is achieved after a certain period of recirculations and / or using other rotor / stator geometries.

Technical information

– Power (W): 1 200
– Volume flow: up to approx. 75 l/min
– Generators: Eight different rotor/stator variants, single-stage
– Product inlet: Single-phase (standard version) / Multi-phase (with optional injector)
– Processing system: Inline product processing / Primarily used in recirculating operations
– Working chamber: Horizontal, single-stage arrangement / Working pressure up to 6 bar / Working temperature up to 90 °C /
Quick coupling for easy disassembly / Single-acting mechanical seal with pressureless
– Materials: High-quality 316L stainless steel / Product contact parts electropolished / Standard Ra ≤ 1.6 μm
– Accessories: Standard & customized selection of recirculation systems
– Motor: 1500 W wear-free high-frequency AC motor / Gearless direct drive / Continuous speed control / Completely enclosed in stainless steel
– Speed range: up to 21 000 rpm
– Sound level: < 62 dB(A) at 21 000 rpm (w/o load)
– Supply voltage: 100 – 230 V ± 10 %, 50Hz / 60Hz
– Relative humidity (max.): 80 % in storage / 80 % during operation
– Operating temperature: 0 – 40 °C
– Protection class acc. to DIN: IP 20
– Dimensions (LxWxH): 324 x 255 x 322 mm
– Weight: 21.2 kg
– EMC standards: IEC / EN 61000-6-2 / EN 61000-6-3
– Safety standard: IEC / EN 61010-2-51

Scroll to Top