MEGATRON MT 3100 S2 – LABORATORY INLINE DISPERSES

– When testing and optimizing formulas, high process safety is paramount.

– This system enables processing of complex material systems with absolutely minimal loss of mass and minimal energy.

– This miniature format production system delivers efficent, replicable results like those of our inline machines used in large volume production.

The expert for your laboratory

– This system was developed to help you realize your ideas under as realistic conditions as possible in small economic quantities.

– During subsequent scale-up, the results can be replicated with our large machines.

– Applications are mainly in recirculation mode.

– Depending on the material’s system, the components bind into the finest emulsions or suspensions with droplet or particle sizes down to a few microns.

– These results are achieved by the machine’s high speed and the resulting peripheral tip speeds as well as precise rotor / stator geometry.

– Depending on the material’s system being process, the desired fineness is achieved after a certain period of recirculations and / or using other rotor / stator geometries.

Technical information

– Power (W): 1 200
– Volume flow: up to approx. 11 l/min
– Generators: Four different rotor/stator variants, single-stage
– Product inlet: Single-phase (standard version) / Multi-phase (with optional injector)
– Processing system: Inline product processing / Primarily used in recirculating operations
– Working chamber:
– Horizontal, single-stage arrangement / Working pressure up to 6 bar / Working temperature up to 90 °C / Quick coupling for easy disassembly
– Quick coupling for easy disassembly / Single-acting mechanical seal with pressureless quench system
– Autoclavable working chambers are available / Viton, EPDM or Kalrez seals / Hose nipple connectors G1/8 “ or clamp connections
– Materials: High-quality 316L stainless steel / Product contact parts electropolished, Standard Ra ≤ 1.6 µm
– Accessories: Large selection of recirculation systems
– Coupling / compatibility: Type F quick coupling for working chamber
– Motor: 1200 W wear-free high-frequency AC motor / Gearless direct drive / Continuous speed control / Completely enclosed in stainless steel
– Speed range: up to 30 000 rpm / autoclavable version up to 18 000 rpm
– Sound level: < 62 dB(A) at 30 000 rpm (w/o load)
– Supply voltage: 100 – 230 V ± 10 %, 50Hz / 60Hz
– Relative humidity (max.): 80 % in storage / 80 % during operation
– Operating temperature: 0 – 40 °C
– Protection class acc. to DIN: IP 20
– Dimensions (LxWxH): 275 x 220 x 245 mm
– Weight: 10 kg
– EMC standards: IEC / EN 61000-6-2 / EN 61000-6-3
– Safety standard: IEC / EN 61010-2-51